How to treat for termite in house plans

How to treat for termite in house plans

Hello there this article will be discussing is about how to treat for termite , which is one of the important aspects in construction. Termites are small, pale soft-bodied insects that lives in large colonies with several different castes, typically within a mound of cemented earth. Many kinds feed on wood and can be highly destructive to trees and timber While each termite species thrives in different climates and eats different types of food, all termites require four things to survive: food, moisture, shelter and optimal temperature. Unfortunately, all homes, regardless of their construction type, can provide these ideal conditions for termite infestation.

Before Construction
Treating termite before construction can help you defend against possible claims in the future. Where construction specification for several projects requires the protection for termite in their finishing’s. To help you in dealing with this problem this article will provide you with some tips that you must incorporate in your construction activities. Food and moisture resources around and inside home should be eliminated because termites are attracted towards moisture.

Where Are The Termites?
Termites are frequently living where there is a high concentration of moisture and dampness. In old houses these are frequent problems because they tend to live in obstructed or block water supply and sewerage pipes. Also there is evidence that inside wood products or decaying wood surfaces are high probability areas for a termite to live in where they end up actually eating wood and wooden products inside your house.

Pre Construction Chemical Treatment
Termite treatment in pre construction stages includes few steps that must be done to ensure an area of termite-free construction.

Treating the soil before any slab placement with insecticides is the most common method of termite treatment. This will form a chemical barrier between ground slab and masonry that will prevent the insects to approach the building. The chemical treatment can be done as follow:

  • Before making the foundation the bottom and sides of excavation must be treated with chemical products.
  • make holes in the earth where slabs on grade will be built and fill them with chemical products.
  • Be sure to use chemicals where walls and floors intersect.
  • Treat the perimeter of the construction by making holes filled with chemicals all around the structure.
  • In pipe bedding fill an area with chemical products to secure the future of the piping.
  • Use specific anti-termite chemical to treat the portion of the buildings were wooden products such as cabinets, doors, among others, will be placed.

Post-construction termite treatment
We can’t be acting in the pre construction chemical treatment all the time. Sometime termites are found after construction, so what can we do?

Start with an assessment of the entire area before starting any kind of treatment. A deep investigation will determine the extent of the damage, if any damage is found then determine the location of the termite, the access points to the structure and their spread in the area. The following tips should be kept in mind during chemical treatment.

  • As in the pre construction process, make holes and filled them with chemicals, to create a barrier around the house.
  • Treat the floors and walls by drilling holes and filling them with chemicals. All walls or the vast majority of the walls have to be treated to ensure that no more spreading will continue.
  • Apply chemicals on all points of contacts of wood with the ground or with any part of the building.
  • The voids in masonry can be used with anti-termite treatment.
  • Change and replace wood products or furniture that have high impact and presence of termites, beyond any limit of reparation.

Precautionary measures
when you
treat for termite perform these simple steps to ensure that your area kept free from these pest .

  1. Keep drains and gutters clean to avoid leakage.Make sure that there are no blockage, filtration nor broken pipes with excess of moisture around them.
  1. Eliminate sources of moisture.Do not leave unattended areas where there is a high concentration level of humidity. Clean those areas constantly to assure that it wont face the same problem again.
  1. Destroy termites.Apply chemicals as soon as you detect areas where termites are being reunited to avoid the spreading of it.
  1. Remove Wood Products.Remove wood products that have had the presence of moisture or have been in contact with water for a long period of time.
  1. Eliminate the wood contact with the ground.Do not bury direct pieces of wood in the ground for any use to avoid the moisture from getting in it.
  1. Fill junctions or voids.If you notice some voids of open space between the building and the ground, act quickly and fill those areas to avoid termites getting in the house.

The Chemicals Used for the Treatment:
There are currently several general kinds of termite chemicals registered for soil treatment. All termite chemicals are effective for their intended purpose but the choice often boils down to toxicity and odour versus longevity and resistance to leaching.
The water based termite chemicals do not contain solvents and are odorless. Some of the water based termite chemicals include Premis, Biflex Aqua and Termadore. The Premis is a chloro-nicotinyl type termite chemical and has a toxicity rating of S5. Premis termite chemical remains effective for at least two years.
The Biflex Aqua is a synthetic pyrethroid water based termite chemical with a toxicity rating of S6. Where its recommended to do a re-treatment of termite treatment with Biflex Aqua after five years for maximum effectiveness. The Biflex Aqua gets blinded very quickly and strongly to the soil particles and provides a best option where moisture movement in the soil is a factor.

Contact our Architects  at the website for further advise.

Prepared by: http://www.sda-architect.com/

Related Posts